Aspen Test Engineering Fixture Buyback Program we will recycle your old fixtures ict test fixtures genrad
Please call for a quote ict test fixture programs
Aspen Test Engineering Fixture Buyback Program we will recycle your old fixtures ict test fixtures genrad
Please call for a quote ict test fixture programs
Don’t put that POD i n your fixture!
Aspen Test Engineering now supports In-System
Programming of the Renesas 78K0 family of
Microcontrollers on
SOFTWARE FEATURES:
the Teradyne
Test Station or
GR228x.
HTS immediately available for UPD78F0842, UPD78F0843, UPD78F0849, UPD78F0848,
• Total pin-test programming and verify time approximately 16 seconds for 60 Kbytes, or
about 10 seconds for checksum verify only.
• Quick turn model availability for the entire 78K0/Dx2 family.
• Hybrid models also include a firmware driven pin test with pin-level diagnostics
equivalent to Basic Scantm. All of the GPIO pins are tested.
• Flash sizes 24K, 32K, 48K and 60K.
• A console program will convert Intel Hex files to DSM.
• Devices are programmed
HARDWARE BENEFITS:
directly by
the Teradyne Test Station or GR228X.
• Opens Xpress or Frame Scan probes
• No POD required in the fixture.
can be eliminated from
your fixture.
Shutdown that dedicated Flash Station for Renesas Microcontrollers!
Start saving money on every piece you build!
Call David Kufta at 678.797.5566 or email sales@aspentest.com today to
discuss your existing or future programming and fixture needs.
Aspen Test Engineering
Aspen Test Engineering 1200 Diamond Circle, Suite C Lafayette, CO, 80026 US
Copyright © 2019 Aspen Test Engineering - All Rights Reserved.