STM 32

STM32 Hybrid Models for Your GR228X and TS12X

If you are testing with a GR228X or TS12X the cost to produce an STM32 product just became a lot cheaper!

Aspen Test now supports ISP models for the ST MICRO STM32 Family of Controllers.

Your GR228x or TS12x always had the capability.1

Someone just needed to write the tool-set to do it!

We will deliver Hybrid ISP models to Order for any STM32 (CORTEX M3) – 32 bit Microcontroller. There are 62 unique devices in this family.

Up to 16 (same type) devices could be programmed concurrently (with common or different code).

This hybrid model will generate a full pin test using the Boundary-Scan capability of the part. The main flash will be erased, programmed and verified.

Test and programming times from less then 1 second for 32K-bytes, to around 40 seconds for full programming of a 512K-byte device.

Your custom model will include an HTS, a program that will convert Intel Hex files into files for Deep Serial Memory (DSM) and easy to follow documentation and Design for Testability (DFT) guidelines.

Why put a pod in your fixture when you don’t need one?

Why spawn an external routine from your ICT program when you don’t need to?

Why program STM32’s at a dedicated flash station when you could consolidate this

task to your ICT and save money on every piece you build?

Call David Kufta at 678.797.5566 or email sales@aspentest.com today to

discuss your existing or future programming and fixture needs.

1 Tester requirements: GR228X or TS124 with Deep Serial Memory (DSM) and a Clock Sync Trigger (CST) card.